Mixing Chamber Top Gasket for H1 Series Carburetor
This reproduction rubber gasket produce by POP Minami (Japan). PROJECT H2 had stocked already.
- PRODUCT: Mixing Chamber Top Gasket
- MODEL(S): All Kawasaki H1 Series VM28 Carbus
- PRICE: $14.00
++ Description
The images not H1 parts
Old gasket
After cleaning
About this product
The airtight gasket is very important for a mixing game bar, but gasket was not prepared as a repair part from Kawasaki. The gasket may have caused the functional fall by having used for a long time. Moreover, although a gasket may be lost, a serious trouble is induced in the case which is not using the gasket.
A new gasket is attached, after removing an old gasket and removing the remaining bond from the mixing chamber top. When pasting up a gasket, the bond must use a correct type.
Compatibility
The gasket can be use to all H1 models carburetors. Please use a gasket after cleaning mixing body and top cap. Please check the fit face of top cap. If the face is distorted, that have to repair.
Order
NOTE: The Order Page will open in a new window.
| PRODUCT ID | NAME | ORDER PAGE ⇒ |
|---|---|---|
| PHOT1015-0013-B | H1 Mixing Chamber Top Gasket Set |  |
