News Update: 2004
Update: 2006-08-21
• Update information: 2004-12-04
Discontinued Items
We are sold out of these items.
* H2 Center Crank Shaft Oil Seal Set
* H2, 520 Sprocket Set
* Chrome-molybdenum Head Nut Set
Please check the Discontinued item information: Discontinued Items
04 Transmission Kit
* H2 SPR Tranny Kit - 8 available
* H2 Racing Tranny Kit - 3 available
* H1 Tranny Kit - 1 available
* Z series Tranny Kit - 5 availavle
Please see: 04 Transmission kit
WORK SHOP Update
*H series dual disc brake conversion kit manual [Kawasaki genuine]
*Kawasaki 2 stroke Service Bulletin. Remake the all data.
WORK SHOP
• Update information: 2004-11-10
Sy-Tech Clutch Release:
It has been a long wait, but the clutch release is finally ready for shipment.
Product Details
NISSIN Radial Pump Master Cylinder:
We stock 2 cast body radial pump master cylinders.
Product Details
NISSIN Cast body Radial Brake Caliper:
We stock 2 Gold color calipers.
Product Details
NISSIN Cast body Radial Brake Caliper:
04 Tranny Project Update
Our
'04 tranny kit schedule has been determined! The '04 project will produce
four types of tranny kits, 10 sets each. They will be ready in early April
2005. Orders are now being accepted.
1. H2 Tranny Kit: 6 available
2. H2 Racing Tranny Kit: 4 available
3. H1 Tranny Kit: 2 available
4. Z1 Tranny Kit: 5 available
11/10/2004 update
Tranny Kit more details: 04 Tranny Kit information
New!! Reproduction Oil Seal and Gasket
Mixing
chamber gaskets
This gasket was not prepared as a repair part. However, this is a very important
part and must be exchange for a new gasket in many case.
The gasket was produced by POP Minami (Japanese Constructor) which apprehended
this situation.
The Mixing top gasket set include 3 gaskets. We stocked 6 sets.
Price: $14.00
Product Detail
H
and S series clutch release oil seal
This oil seal was used for H2C, H1E, H1F, KH500, KH400 engines. The oil
seals (genuine part number: 9050-025) is not Kawasaki genuine parts, but
made by NOK (OEM oil seal product company) the same company which made the
original genuine parts.
We stocked 6.
Price: $8.00
Product Details
H2
Center crank shaft oil seal set
H2 Center crank shaft oil seals available!
These H2 crank oil seals (genuine part number: 92054-019, 92054-020) are
not Kawasaki genuine parts, but made by NOK (OEM oil seal product company)
the same company which made the original genuine parts.
We stocked 3 sets.
Price: $48.00.
Product Details
• Update information: 2004-09-16
New type Chrome-moly cylinder stud bolt
PROJECT
H2 will produce a new type of chrom-moly cylinder stud bolt set.
* Shape: New design
* Surface treatment: Parkerizing
* Sales unit: Set of 12
* Price: $128.00
* 10 sets available
Contact mail Please inquire for these product with an e-mail.
• Update information: 2004-09-07
Discontinued Items
We have discontinued these products.
1. Sy-Tech H2 Chro-moly Cylinder Head Nut set
2. Sy-Tech H2 Chro-moly Cylinder Stud bolt set (Look for our new cylinder
stud bolt set scheduled to be released in November.)
3. Sprocket spacer
H2 Tranny Kit
1 kit left! I brought the last of the lot of the Tranny Kits back with
me from Japan. Get it while you can! Price: $1,520.00
Project H2 is now working on producing a second lot of Tranny Kits for:
H2 (10 kits), H1 (10 kits), and what you've all been waiting for H2R (5
kits). The kits will include the same as the first lot, and are to be produced
in 2005. Details will be posted as they become available.
Product details: H2 Tranny Kit
Limited sale. 520 Sprocket Set
This
sprocket set is including drive and driven sprockets. You can make choice
drive sprocket size from 14T or 15T. The driven sprockets is our original
that use from AFAM blank material and hard anodized finish.
Weight:
Drive sprocket - 15T= 0.99 lb, 14T= 0.95 LB
Driven sprocket - H2 = 1.10 LB, H1 = 1.12 LB
Availavle:
H2: Drive sprocket - 15 (or 14), Driven sprocket - 47 ---- 3 sets
H1: Drive sprocket - 15 (or 14), Driven sprocket - 45 ---- 3 sets
S2: Drive sprocket - 14 (or 15), Driven sprocket - 43 ---- 1 sets
Price:
H2 and H1: $142.00, S2: $134.00
More information: 520 Sprocket set
• Update information: 2004-07-01
520 Drive Sprocket
The
520 Drive Sprocket is produced for PROJECT-H2 in conjunction with the 520
Chain conversion kit project. 520 Drive Sprocket is compatible with all
Kawasaki Triple series vehicles. (750 H2, 500 H1, 400 S3, 350S2, 250 S1)
We make exclusive lock-nut in F sprocket and improve looseness of sprocket
nut. You can make choice sprocket size from 14T or 15T.
Product Information:
520-14 Drive Sprocket, 520-15 Drive Sprocket
Price: from $46.00
Product details: 520 Drive sprocket
• Update information: 2004-06-19
Project H2 is kicking around these ideas
Production
of Control 4: Project H2's original 4 control wire throttle kit for the
Kawasaki 750 H2.
Background: Project H2 has received many inquiries regarding the throttle kit used on the Yellow H2 (owner: Hidenori Kamii). A SUZUKI RGB 500 throttle was modified, allowing the four control wires to be directly connected to the carburetors and the oil pump. Using this as a base, Project H2 has designed Control 4, a 4-control wire throttle kit for the Kawasaki H2. The proposed kit will include a throttle assembly, 4 control wires (L, C, R carburetor control and oil pump control), and cable adjusters.
We're planning 10 kits and currently looking into prices and the feasibility of this project.
Production
of Short throttle cable and Short clutch cable for the Kawasaki H2.
These wires are shorter than genuine wires and great for low handle bars.
*Clutch cable: low-friction wire with a new (lever side) wire guide (see
photo).
Please inquire for these product with an e-mail.Contact mail
New Product. 750 H2 Primary Nut Lock Washer kit
The
lock washer (Genuine part No. 420B2014) and O ring (Genuine part No. 670B3024)
are no available to long time. The Primary Nut Lock washer kit include one
lock washer with one O ring.
Product Information:
Item No. PHOT-1015-004
Product: Primary Nut Lock washer kit
Price: 1=$11.00
Order Information: Product Details
New Product. 750 H2 Side cover grommet
H2's
side cover grommet (part No. 92071-058) is no available to long time. This
reproduction rubber part produce by Mr. Shirayama. PROJECT H2 had stocked
already.
Product Information:
Item No. PHOT-1015-001
Product: Side cover grommet
Price: 1=$18.00
Order Information: Product Details
• Update information: 2004-05-03
New Product. ADVANTAGE / NISSIN Brake product
NISSIN Radial Mount caliper series and Cast body Radial Pump Master Cylinder will release from Advantage Co., Ltd. The
Radial
Mount Caliper series is lineup by a 3 type.
a) Billet body type of the series top model.
b) Cast body type for Road Model.
c) Cast body type for Off road model.
Piston dust shield adopts all models.
Road model calipers mounting pitch are 108 mm (the same as Brembo, Tokiko). Can select a body color than gold and black (Cast body type).
Nissin
Radial pump muster cylinder
The Radial Pump Brake Master Cylinder employed a casting body, the price
is $210.00 and popular edition master cylinder. The piston size is 19 mm.
Master cylinder include 2 type Holders and brake switch.
More product information please check this page. NISSIN New product
Please inquire for these product with an e-mail.Contact mail
• Update information: 2004-05-31
Sy-Tech Clutch Release Ready!
I
It
has been a long wait, but the clutch release is finally ready for shipment.
We have announced that it will be for sale beginning June 10, 2004, however,
for our valued customers who have been patiently waiting for its arrival,
we will begin shipments from today.
Due to the fluctuating yen, the third lot of clutch releases will be sold
at $105.00 USD.
Product Details
How to Order:
Although we have your backorder information on file, we would like to confirm and update your details. Please resubmit your information and specify your preferred payment method on the order form at the link below:
http://www.project-h2.com/sale/order_e.php
PayPal Online Payment Customers:
If you choose to use PayPal, you will receive an electronic statement. Please check the statement for any mistakes prior to transferring your payment. If there is something wrong with your statement, please contact Project H2 immediately. After receiving your payment through PayPal, your order will be shipped on the next business day.
Postal Money Order Customers:
Please make the Postal Money Order in US dollars out to P.A. Factory
• Update information: 2004-05-14
Sy-Tech Clutch Release inal lot
We are happy to announce that we will be producing and final lot of 100.
We are still negotiating production schedules but hope to have the clutch
release ready this Jun. P.A.FACTORY will inform on the site when we have
finalized the details regarding price, shipping and date of delivery.
Thank you.
