Last update: 2008-09-30
Mixing Chamber Top Gasket for H1 Series Carburetor
This reproduction rubber gasket produce by POP Minami (Osaka Mach Club Japan). PROJECT H2 had stocked already.
| Product ID | Name | Price | Order Page |
|---|---|---|---|
| PHOT1015-0014 | H1 Mixing Chamber Top Gasket Set | 14.00 USD |  |
The airtight gasket is very important for a mixing game bar, but gasket was not prepared as a repair part from Kawasaki. The gasket may have caused the functional fall by having used for a long time. Moreover, although a gasket may be lost, a serious trouble is induced in the case which is not using the gasket.
A new gasket is attached, after removing an old gasket and removing the remaining bond from the mixing chamber top. When pasting up a gasket, the bond must use a correct type.
The gasket can be use to all H1 models carburetors. Please use a gasket after cleaning mixing body and top cap. Please check the fit face of top cap. If the face is distorted, that have to repair.
